MCU14/0073 Town Planning Report

                                                                            OPW13/1038

     (c)    Certificates demonstrating currency of public liability insurance and works
            insurance covering the works in line with the planning scheme and
            relevant government legislations.
     Any changes to the details associated with the supervising RPEQ or Principal
     Contractor during construction, must be notified to Council in writing within 5
     business days of the change occurring.

4.   Any conflict between the development and an existing or proposed service must
     be referred to the relevant service authority for determination prior to
     commencement of works.

5.   The developer must meet any costs to repair damage to any Council asset during
     construction, where damage is a result of the development works. Damage to
     assets must be repaired immediately where it creates a hazard to the community.
     In circumstances where the damage does not create a hazard to the community,
     it must be repaired immediately on completion of the works associated with the
     development. A condition report including photographs of the frontage of the site
     should be completed and submitted to Council prior to any works commencing.

     General
6.   All works must be supervised by a Registered Professional Engineer of
     Queensland (RPEQ), and they must certify that all works conform to the
     Operational Works permit.

7.   All works must be constructed in accordance with:
     (a)     The approved plans and conditions detailed in this Decision Notice
     (b)     The relevant conditions of the higher order Material Change of Use
             approval File: MCU13/0171 and the requirement of any other permits
             related to this development.
     (c)     All relevant Noosa Council Planning Scheme Policies, standard drawings,
             standard specifications and guidelines, particularly PSP 5 Engineering
             Design Standards – Roads, Drainage and Earthworks.
     (d)     The latest version of the Healthy Waterways document “Water Sensitive
             Urban Design Technical Design Guidelines for South East Queensland”.
     (e)     Provision of the Work Health and Safety Act and such other legislation as
             is applicable to workplace health and safety.

     External Roadworks & Road Widening Works
8.   All pavement widening or construction of new pavement must join neatly to the
     existing pavement so that there are no irregularities in line or level resulting at or
     adjacent to the join for the length of the construction. Where necessary the
     existing pavement must be brought to a satisfactory standard in accordance with
     standard drawing SEQ R-170 and Council’s related engineering standards.

9.   The installation and/or modification of any street signs, line marking and Raised
     Reflective Pavement Markings (RRPM’s) must be in accordance with the Manual
     of Uniform Traffic Control Devices (MUTCD).




                                                                                 Page 3 of 11