2016-10-17 GC Agenda - Item 8 - Attachment 2 (Amended) - Statement of Financial Position

material must be perforated so as not to impact the vision of the driver and provide the
passenger with an ability to view their next stop.

Interior Painting and Finishing:

The relevant sections of the interior of the bus shall be finished in an approved material,
applied strictly in accordance with the advice and recommendations of the paint
manufacturer concerned.

Particular attention shall be given to the reduction of windscreen reflections arising from
coloured and polished surfaces in and around the driver's compartment. All possible sources
of reflection, except hand rails, shall be finished with black satin paint.

Glossary

‘Laden’ means ready for service together with maximum number of occupants, both seated
and standing and all fluid reservoirs filled to nominal capacity, limited only by the
manufacturer’s gross vehicle mass and/or statutory limits applicable in the State of
Queensland at the date of manufacture of the bus.

‘Occupants’ means the driver and all seated and standing passengers.

      The mass of each occupant shall be as provided for in Australian Design Rule 58.

      In calculating individual axle loads, it shall be assumed that all seats are occupied
       and standing occupants are distributed in accordance with any statutory requirements
       in the State of Queensland.

      Where no statutory requirements apply, standing occupants shall be distributed
       equally throughout the available space behind the driver’s bulkhead.

 ‘Unladen’ means ready for service and all fluid reservoirs filled to nominal capacity
(including fuel) and all standard equipment fitted apart from spare wheel or wheel carrier, but
without occupants.

The following items shall have the same meaning as given in Australian Design Rule
Definitions:

       ‘Approach angle’

       ‘Articulated omnibus’

       ‘Axle load’

       ‘Chassis’

       ‘Compliance plate’

       ‘Departure angle’

       ‘Left-hand side’

       ‘Right-hand side’

       ‘Total length’.


                                                                                              45