Appendix A - Copy of Existing Approval · 132008.1128

                                                                               132008.1128
70.   A Waste Management Plan (Operational) in accordance with Planning Scheme Policy
      No.9 "Waste Management Multi-Dwellings and Commercial and Industrial Premises",
      shall be developed and implemented on site, the contents of which shall be endorsed
      by Council's Environment & Landscape Assessment Unit prior to or at the time an
      application is made for operational works. The Waste Management Plan must include
      the following as a minimum: -
         70.1.     The types and estimated volumes of waste that will be generated from the
                   activities approved within the development.
         70.2.     Methods to be used for dealing with garden waste.
         70.3.     Initiatives to minimize waste either by waste prevention, reduction, re-use or
                   recycling.
         70.4.     Description of procedures and clearly identified site responsibilities for all site
                   occupants for getting all waste to the bins; the storage of bins and the
                   collection of bins by the contractor.
         70.5.     A description of the design details of waste storage and recycling areas
                   including size, location, elevation and floor plan, methods of bin washing and
                   system to prevent storm water getting into sewer via the bin wash.
         70.6.     A description of types and volume of waste storage containers to be used,
                   and the collection frequency of containers,
         70.7.     The waste and recycling storage area shall include the provision of
                   containers for all waste and recycling materials including putrescible matter,
                   non-recycling waste, paper/ cardboard, glass, aluminium/steel cans, waste
                   oil, styrofoam boxes, etc, and bin washing facilities connected to sewer.

UNITYWATER

Water & Sewage
71.    A single Unitywater installed primary water meter must be provided immediately inside
       the property boundary of each Lot (excluding balance Lot 1). Additional water meters
       must be installed for each tiUe of a community tiUe or sub-lease scheme. Meters must
       be Unitywater approved, installed in accordance with Unitywater requirements and
       remain accessible at all times for reading and maintenance purposes.
72.    The fire-fighting demand on Unitywater's water supply system from the development
       must not exceed 15litres per second.
73.    Construction activities must not impede the access of Unitywater or Fire Brigade
       personnel to vital infrastructure (eg. valves, fire hydrants and sewer access chambers)
74.    A minimum clearance of 1.5 metres must be maintained between Unitywater sewers
       and proposed building envelopes, buildings (including roof overhang) and other
       structures.
75.    The proposed bio-retention basins must be located a minimum of 1.5 metres from
       Unitywater sewerage infrastructure and clear of any sewer easement.
76.    The level of the existing sewer access chambers within the development site must be
       adjusted to suit the proposed finished surface levels. Work must be undertaken by
       Unitywater at the applicants cost.




PD-OA-FM58/5-02l0412009                                                            Page 13 of 24